I am new to Ubuntu (installed Ubuntu 12.10 desktop on my Mac Mini today from Ubuntu iso – mac mini had blank SSD on it i.e. no OS X at all).
First drama is that Ubuntu installer seems to be setup for DHCP whereas my LAN is all static IP based.
Anyway, Ubuntu installed okay except that it seems to have gone into loopback mode and cannot find the Ethernet adapter on the Mac Mini.
Doing an 'ifconfig -a' confirms the loopback.
Doing an lspci reveals the following:
01:00.0 Ethernet controller: Broadcom Corporation Netxtreme BCM57766 Gigabit Ethernet PCIe (rev 05)
I tried the following:
Setting /etc/hosts file to include:
I wanted to set /etc/network/interfaces file to have:
iface eth0 inet static
Except that eth0 doesn't seem to exist as far as Ubuntu is concerned.
192.168.0.1 is my modem/router which connects directly to the Internet.
I wanted to edit /etc/resolv.conf so that I could specify some DNS name servers (3 in total) that should be used except that the resolv.conf file contained text warning me that the file would be overwritten so don't bother doing anything manually in that file.
Checking 'System Settings > Network' I cannot see wired Ethernet at all. There is, for some reason, a 'Network Proxy' defined. A messagebox appears saying:
"The system network services are not compatible with this version."
I have not been able to establish a network connection at all.
1. What can I try to fix this?
2. Do I need a driver from somewhere and can I install said driver without having to recompile the kernel?
3. Is there a GUI way of setting network parameters or is editing the hosts, resolv.conf (
), and interfaces file the only way?
4. How can I find the Ethernet Mac address from terminal (I couldn't get it by doing 'ifconfig -a')?